Scanning_ 89Scanning and sending to SMB/WEBDAV/FTP serverYou can select up to four destinations using SMB, WEBDAV, or FTPservers.1. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 35).2. Press Scan to Server from the display screen3. Set the scan features in the Advanced, Image, or Output tabs (see"Changing the scan feature settings" on page 96).4. Press the Basic tab.5. Press the server name input area, you can enter a recipient’s serveraddress manually. You cannot enter address in the 2 before enteringaddress in the 1(see "Entering server addresses manually" on page 90).You can also use Address Book to enter the addresses easily (see"Entering server addresses from the address book" on page 89).6. Set the scan quality by Duplex and Resolution (see "Scanning fromboth sides of originals" on page 96 and "Changing the resolution" onpage 96).7. Press Start on the control panel.The machine begins scanning and then sends the scanned image to thespecified server.If an original is placed on the scanner glass, the machine shows thewindow asking if you want to place another page. Load another originaland press Yes. When you finish, press No on this window.• To cancel the current scan job, press Stop on the control panel. Oryou can delete current and pending jobs using Job Status on thecontrol panel. Select the job you want to cancel and press Delete(see "Job Status button" on page 30).• While the machine is sending a scanned data, you cannot use themachine to copy or to send a fax.Entering server addressesOnce you have stored the frequently used addresses into the address book(see "Setting up an address book" on page 128), you can enter serveraddresses singly or you can enter server addresses directly using +Add.Entering server addresses from the address book1. Press Scan to Server from the display screen.2. Press Address Book.3. Press the Search input area. Then the pop-up keyboard appears.4. Enter the first alphabet or full server name you are looking for.Then press Ok.5. Press Search.When searching is completed, the screen displays the searchresults.6. Press the server name you want from the search results and pressOk.Press the delete icon( ) to delete a server address entered.
