Faxing (optional)_ 119Adjusting the document settingsBefore sending a fax, you can adjust the document settings, such asresolution, darkness, color, duplex and so on. Refer to explanation of thissection.The document setting herein is for the current job only. If you want tochange the default settings on document settings, refer to MachineSetup > Application Setting > Fax Settings > Default Value.Selecting the size of originalsA fax can be sent after specifying the original document size if the originaldocument size cannot be detected automatically or if you wish to specify acertain document size.1. Press the Advanced tab > Original Size from the display screen..2. Press the appropriate option.You can change the paper list on the display screen pressing inchSize or mm Size. The paper list is divided into the available A/Bsize type and letter size type paper in this machine.• Auto: Automatically detects the size of originals, but this optionsupports only when originals are Letter, Ledger, Legal, Statement,A3, A4, A5, B4, or JIS B5-sized.• Other preset values: Allows you to easily select values commonlyused.3. Press OK from the display screen.Faxing on both sides of originalsThis function is especially intended for two-sided originals. You can selectwhether the machine sends the fax on one side or both sides of the paper.1. Press the Advanced tab > Duplex, then set the original orientation.2. Press the appropriate option.• 1 Sided: For originals that are printed on one side only.• 2 Sided, Book: For originals that are printed on both sides.• 2 Sided, Calendar: For originals that are printed on both sides, butthe back is rotated 180 degrees.To use 2 Sided, Book and 2 Sided, Calendar, load the originalson the DADF. If the machine cannot detect the original on theDADF, it automatically changes the option to 1 Sided.3. Press OK from the display screen.
