Media and tray_ 45Printing on special mediaThe table below shows the available special media for each tray.When using special media, we recommend you feed a piece of paperat a time. Check the maximum input number of media for each tray(see "Print media specifications" on page 252).The media types are shown in the Printing Preferences. This paper typeoption allows you to set the type of paper to be loaded in the tray. Thissetting appears in the list so that you can select it. This will let you get thebest quality printout. If not, the desired print quality may not be achieved.• Plain: 71 to 90 g/m2 (19 to 24 lb) normal plain paper.• Thick: 91 to 105 g/m2 (25 to 28 lb) thick paper.• Heavy Weight: 106 to 175 g/m2 (29 to 46 lb) thick paper.• Extra Heavy Weight 1: 176 to 216 g/m2 (47 to 57 lb) thick paper.• Extra Heavy Weight 2: 217 to 253 g/m2 (58 to 67 lb) thick paper.• Thin: 60 to 70 g/m2 (16 to 18 lb) thin paper.• Bond: 105 to 120 g/m2 (28 to 32 lb) bond.• Color: 75 to 90 g/m2 (20 to 24 lb) color-backgrounded paper.• Labels: 120 to 150 g/m2 (32 to 40 lb) label.• Transparency: 138 to 146 g/m2 (37 to 39 lb) transparency paper.• Envelope: 75 to 90 g/m2 (20 to 24 lb) envelope.• Preprinted: 75 to 90 g/m2 (20 to 24 lb) preprinted paper.• Cotton: 75 to 90 g/m2 (20 to 24 lb) cotton paper.• Recycled: 60 to 90 g/m2 (16 to 24 lb) recycled paper.• Archive: 70 to 90 g/m2 (19 to 24 lb) If you need to keep the print-out fora long time, such as archives, select this option.• Letterhead: 70 to 90 g/m2 (19 to 24 lb).• Punched: 70 to 90 g/m2 (19 to 24 lb) .• Thin CardStock: 105 to 163 g/m2 (28 to 43 lb) cardstock.• Thick CardStock: 170 to 216 g/m2 (45 to 57 lb) cardstock.• Thin Glossy: 106 to 169 g/m2 (28 to 45 lb) glossy paper.• Thick Glossy: 170 to 253 g/m2 (45 to 67 lb) glossy paper.EnvelopeSuccessful printing on envelopes depends upon the quality of theenvelopes.To print an envelope, place it with the flap side up.• When selecting envelopes, consider the following factors:- Weight: The weight of the envelope paper should not exceed90 g/m2 (16 lb) otherwise, a jam may occur.- Construction: Prior to printing, envelopes should lie flat with lessthan 6 mm (0.25 inches) curl, and should not contain air.- Condition: Envelopes should not be wrinkled, nicked, or damaged.- Temperature: Use envelopes that are compatible with the heat andpressure of the machine during operation.• Use only well-constructed envelopes with sharp-and well-creased folds.• Do not use stamped envelopes.• Do not use envelopes with clasps, snaps, windows, coated lining,self-adhesive seals, or other synthetic materials.• Do not use damaged or poorly made envelopes.• Be sure the seam at both ends of the envelope extends all the way tothe corner of the envelope.TypesStandardtray/optionaldualcassettefeederOptionalhighcapacityfeederaa. Optional high capacity feeder supports only A4 and Letter sized paper.Multi-purposetrayThick O O OHeavyweight O O OExtraHeavyweight 1O O OExtraHeavyweight 2X X OThin O O OCotton O O OColor O O OPreprinted O O ORecycled O O OBond O O OArchive O X OLetterhead O X OPunched O O OThinCardstock O O OThickCardstock O X OThin Glossy X X OThick Glossy X X OEnvelope X X OTransparency X X OLabels O X O
