Panasonic WV-NS324 Operating Instructions Manual

Also see for WVNS324 - NETWRK CLR DOME CAME: Brochure Reference

Panasonic WV-NS324 Operating Instructions Manual Manual pdf 32 page image

-33-● Light Control Setting (ALC/MANUAL)Selects the ALC or MANUAL mode for adjusting thelens iris.1. The factory default setting is ALC.ALC: The lens iris is automatically adjusted to suitthe brightness of the object.MANUAL: The lens iris is fixed at the set valueregardless of the brightness of the object.2. In case of ALC OPress the CAM (SET) key. The backlight compen-sation menu appears on the monitor screen. Seepage 37 for the setting.3. In case of MANUAL OPress the CAM (SET) key. The setting menuappears on the monitor screen. Set the lens irislevel as desired by moving the joystick to the rightor left.● Auto Focus Setting (AF MODE)1. The factory default setting is MANUAL.MANUAL: AF does not work after moving to a pre-set position.AUTO: AF works after moving to a preset position.● To Return to the Preset Number SetMenu• Move the cursor to RET and press the CAM (SET)key. The PRESET NUMBER SET menu appearswith the * mark to the right of the preset positionnumber.● To Return to the Setup Menu• Move the cursor to RET and press the CAM(SET) key.■ Deleting Preset Positions1. Move the cursor to PRESET 1 and select the posi-tion number to be deleted by using the joystick.2. Press the CAM (SET) key to display the preset set-ting menu.PRESET NO. 1POSITION SET OPRESET ID ON OALC/MANUAL ALC OAF MODE MANUALRET DEL** MANUAL CONT **IRISRET••••|••••CLOSE OPENPRESET NO. 1POSITION SET OPRESET ID ON OALC/MANUAL ALC OAF MODE MANUALRET DEL** PRESET NUMBER SET **1 2 3 45 6 7 89 10 11 1213 14 15 16ID:RET** SET UP MENU **PRESET 1 OMAP OHOME POSITION OFFSELF RETURN OFFAUTO MODE OFFFLIP-A-CHIP OFFCLEANING OFFIMAGE HOLD OFFCAMERA ONETWORK OPRESET NO. 1POSITION SET OPRESET ID ON OALC/MANUAL ALC OAF MODE MANUALRET DEL