Panasonic WV-NS324 Operating Instructions Manual

Also see for WVNS324 - NETWRK CLR DOME CAME: Brochure Reference

Panasonic WV-NS324 Operating Instructions Manual Manual pdf 43 page image

-44-(7) To Restore the Camera Default Position(REFRESH)Move the cursor to REFRESH by using the joystickand press the [F2] button of the WV-CU550CJ.For the WV-RM70, WV-CU360CJ or WV-CU161C,keep pressing the Right and Left switches simulta-neously for 2 seconds or more.(8) Camera Resetting (CAMERA RESET)Move the cursor to CAMERA RESET by using thejoystick and press the [F3] button of the WV-CU550CJ.The camera is reset to the factory settings.For the WV-RM70, keep pressing the Right, Leftand Set switches simultaneously for 2 seconds ormore. For the WV-CU360CJ or WV-CU161C, keeppressing the Right and Left switches and thenumeric button 5 simultaneously for 2 seconds ormore.(9) To Close the SPECIAL MenuMove the cursor to RET and press the CAM (SET)key.The setup menu appears on the monitor screen.Reset to the Factory Default SettingsAny of the above settings plus the ALC/MANUAL levelcontrol and phase adjustments can be reset to the fac-tory default settings by placing the cursor over thedesired mode and then pressing the [F2] button of theWV-CU550CJ. For the WV-RM70, keep pressing theRight and Left switches simultaneously for 2 seconds ormore.** SPECIAL **CHROMA GAIN ••••|••••AP GAIN •••|•••••PEDESTAL •••|•••••HUE •I•••••••– +DNR LOWDEMO MODE OFFREFRESH →PUSH SETCAMERA RESET →PUSH SETRET** SPECIAL **CHROMA GAIN ••••|••••AP GAIN •••|•••••PEDESTAL •••|•••••HUE •I•••••••– +DNR LOWDEMO MODE OFFREFRESH →PUSH SETCAMERA RESET →PUSH SETRET** SPECIAL **CHROMA GAIN ••••|••••AP GAIN •••|•••••PEDESTAL •••|•••••HUE •I•••••••– +DNR LOWDEMO MODE OFFREFRESH →PUSH SETCAMERA RESET →PUSH SETRET