Panasonic WV-NS324 Operating Instructions Manual

Also see for WVNS324 - NETWRK CLR DOME CAME: Brochure Reference

Panasonic WV-NS324 Operating Instructions Manual Manual pdf 6 page image

-6-• Distributing, copying, disassembling, reverse com-piling, reverse engineering, and also exporting inviolation of export laws of the software providedwith this product, is expressly prohibited.Document ConventionThese operating instructions use the following conven-tions when describing the uses and operations.• Windows98 stands for Microsoft Windows98Second Edition.• Windows2000 stands for Microsoft Windows2000.• Windows ME stands for Microsoft WindowsMillennium Edition.• Windows NT stands for Microsoft Windows NTWorkstation 4.0 Service Pack6a.• Windows XP stands for Microsoft Windows XP.■ Camera CleaningEven if this function is used, noise may be produced onthe monitor screen, or the preset position may deviatein the cause of prolonged use.In such cases, activate the refresh mode on the specialmenu. (See page 44.)To use this camera with the WJ-SX550C MatrixSwitcher, set the auto cleaning function on each unit,then clean the WV-NS324 once a day.■ Preset Data Uploading orDownloadingTo download the preset data from the camera to thecontroller or upload the downloaded data to the cam-era, set the following functions to OFF.Downloading or uploading the data may not work nor-mally if these functions are set to ON.• Cleaning (See page 36.)• Auto mode (See page 34.)• Self return (See page 34.)Aim the camera at a motionless object such as a wall ifpossible to download or upload the preset data.Note: Take notice of the following cases when upload-ing the downloaded data to the camera.• Preset positions may deviate. If a preset posi-tion has deviated, delete it and set it again cor-rectly.• You cannot exchange preset data between theWV-NS324 and other models.• Data uploading or downloading is applicablewith Panasonic System Controller only.