-26-This section describes setup procedures common toaccesses from the PC, e.g. transmitting images to anFTP server, sending alarm notice mail, auxiliary devicecontrol, clock setup, and LED control.Buttons Used for Setup MenusClick the buttons on the computer display. Each buttonis assigned functions in the setup as follows.Camera Setup Menus• From the PC1. Open the main page of the WV-NS324 camera,referring to page 45.Login as a level-1 administrator in the dialog box ifrequested.2. Click the [Camera Setup] button on the left side ofthe screen.The login dialog box will appear.Note: Confirm the entered IP address when neitherthe dialog box nor the main page appears.You may need to re-enter the IP address.3. Enter the registered user name and password.Note: Enter "admin" when you operate the systemfor the very first time, or you have not regis-tered user names yet. At this time, you neednot to enter the password.Menu control buttons will appear under the cameraimage.4. Click the [Menu ON] button to overlay ** SET UPMENU ** on the camera image. The cursor is high-lighted in the window.Note: Refer to the next page for setup operations.5. Click the [MENU OFF] button after finishing thesetup operations.The changed settings will be stored in the camera,and the overlaid camera menu will disappear.Notes:• If the browser screen pauses, access the cam-era again on the WWW-browser to validate thesettings for PC oriented items.• You can exit from the camera setup by clickingthe [Return] button, though the menu is dis-played if the [MENU OFF] button has not beenclicked yet.PRIOR TO SETUPMenu ON/OFF button: Opens or closes the setup menu.ESC button: Returns to the previous menu(one layer higher) .UP/DOWN button:Moves up and downthe cursor (pointer).RIGHT/LEFT button:Selects parameters,adjusts some levels.SET button: Validatesthe selection, opens adetailed menu.See page 45.See page 45.