3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXsInstallation Manual 533.3.2 KX-T123211D Software Verification and Programmingfor Inband Integration1. Check the software version of the KX-T123211D by using System Program [98], whichshows the software version number:Y201Z940430(TM3)The underlined digits represent the software production date code (format YYMMDD). Inthis example, the date code is April 30, 1994 (year, month, day). For this software version,the software production date of the PBX must be April 30, 1994, or later.If the software production date of the PBX is earlier than 4/30/94, call National PartsCenter (1-800-833-9626) to order a software upgrade.2. Enable System Program [80] for each extension connected to the VPS.This parameter is used to tell the KX-T123211D which extensions are connected to theVPS. Ports with this parameter enabled can receive Follow-on ID and DTMF call statussignaling (busy, answered, disconnect, etc.) if the Voice Mail integration and DTMFintegration features are also enabled.3. Enable System Program [81] to turn on DTMF Integration. On extensions with the VoiceMail port parameter enabled, the KX-T123211D can send codes (touchtones) to indicatecall states; this increases VPS efficiency. Codes apply to all transferred calls; outside callsonly indicate disconnect (provided the KX-T123211D is programmed for CPC detectionand the Central Office sends the CPC signal). Refer to the Table 3-3 SEQUENCECODES in the Section 3.2.4 PBX Interface Parameters.4. Put all extensions connected to the VPS into 1 extension group using System Program[60].Reserve this extension group for these extensions! Do not mix other extensionsinto this group.5. Enable hunting for the VPS extension group using System Program [08].ReleaseSequence for CallWaiting* N/A F N/A N/A F F F* Check with manufacturer.N/A Not Available(A) Adding "A" for "answer" to the operator and extension transfer eliminates the message:"You have a call" when the AA transfers a call. The VPS disconnects after line is answered.Adding "D" for "disconnect" creates a blind transfer.Table 3-5PBX Type OtherManufacturersT308/T616T1232/TA624 T96 T336TD816/TD1232/TA1232/TD308TD500TDA/TAWseries
