4.6 DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TA624, KX-Installation Manual 1214.6.5 Live Call Screening Private/Hands-Free ModeAssignment via Station ProgrammingThis program assigns a VPS response for when a message is being left in a mailbox. Itdetermines whether an alert tone is sent or whether the recorded message is played throughthe built-in speaker of the extension. The default mode is hands-free. (This is a station levelprogram and should be done at each individual telephone.)PC programming is also available for KX-TD500 users (see 4.6.6 Live Call ScreeningAssignment via PC Programming).1. Enter Station Programming:For KX-TA624With the phone on-hook, Set the MEMORY switch to "PROGRAM".(Display changes to PITS-PGM Mode.)For KX-T series PBX that uses DPT Integrationa. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PITS-PGM Mode.)2. Dial the code for the mode you want this telephone to have.Hands-Free = Press #11 (for KX-TA624) or [71] (for KX-T series PBX that uses DPTIntegration).Private = Press #12 (for KX-TA624) or [72] (for KX-T series PBX that uses DPTIntegration).Screen output: Hands-Free or Private3. Press STORE.4. For KX-TA624Set the MEMORY switch to "SET".For KX-T series PBX that uses DPT IntegrationPress the PROGRAM button or lift the handset.5. Repeat these steps for each telephone.For the KX-T series PBX that uses DPT Integration:A single-line telephone that is connected to the same extension as a proprietary telephonecan also be used to monitor an incoming message. Be sure that Live Call Screening on theconnected proprietary telephone has been activated. This feature is useful when you are usinga cordless telephone. The handset sounds an alert tone to let you know that a message isbeing recorded. To intercept the call, flash the hook.Conditions: None
