7.3 SYSTEM REPORTSInstallation Manual 211FROM: The date and time of the last clearing of this reportED: External Delivery MN: Message Notification Rcv: ReceiveFull-line Time: The total time that both ports were used simultaneously.7.3.7 Port Usage Statistics ClearClears the Port Usage Report for use again.Type [Y] (yes) or [N] (no). If "Y" is entered, the system will clear the data. Wait until "PortUsage Report Data Cleared!!" appears on the screen before proceeding.7.3.8 Flash Memory Usage ReportThe Flash Memory Usage Report indicates the amount of flash memory storage used and theflash memory availability in minutes. It also presents the following statistics:• The number of messages that were recorded by callers and were copied since the lastclearing of this report.• The number of messages that were copied since the last clearing of this report.• The number of messages that were deleted by subscribers, and expired and wereremoved by the system since the last clearing of this report.• The number of messages that expired and were removed by the system since the lastclearing of this report.To clear the Port Usage Statistics Report, follow the menu path as shown:System Administration Top Menu-2-2-2To select the Flash Memory Usage Report, follow the menu path as shown:System Administration Top Menu-2-1-6System Reports - System Report Clear - Port Usage Statistics ClearMay I clear port usage report data? (Y/N) : =** Flash Memory Usage Report JAN-22-2001 8:30 PM **Drive Avail Used (%)1 120 min 0min (0)2 240 min 0min (0)FROM : : JAN-21-2001 10:20 PMNew Cpy Del ExpMSGs 0 0 0 0
