B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS298 Installation ManualB5.4 Toll SaverThis feature permits a subscriber to check his mailbox from pre-assigned Caller ID numbersor by dialing a pre-assigned DID number without incurring telephone charges. When calledfrom the assigned number, the VPS notifies the subscriber whether or not there is a newmessage in his mailbox by changing the delayed answer time (see Table B-18). Thesubscriber can reduce his telephone charges by entering his mailbox only when there is a newmessage. If this feature is activated, the subscriber will access his mailbox directly.NoteDID number setting for this feature is only available when the VPS is connected to thefollowing PBXs with DPT Integration.• KX-TD816 (P311Q or higher)• KX-TD1232 (P211Q or higher)• KX-TD500 (V4M or higher)NoteThe Delayed Answer Time specified for Toll Saver has higher priority than the onespecified for the Port/Trunk Service.To access the menu for Toll Saver Parameter, follow the menu path as shown:System Administration Top Menu-1-4-4Table B-18Parameter Value Range(Default)Description/FunctionDelayedAnswer Timefor NewMessage5-60 s(12)Specifies the length of time (in seconds) before thesubscriber accesses a mailbox that has newmessages.DelayedAnswer Timefor No NewMessage5-60 s(24)Specifies the length of time (in seconds) before thesubscriber accesses a mailbox that has no newmessages.
