B2 SYSTEM ADMINISTRATION—MAILBOXES258 Installation ManualB2 SYSTEM ADMINISTRATION—MAILBOXESUp to 62 Subscriber Mailboxes can be created or edited by following the correct sequence ofsteps.Editing MailboxesThe parameters of each mailbox can be edited based upon the needs of the subscriber.To access the menu for mailbox setup, follow the menu path as shown:System Administration Top Menu-1-1-1-Mailbox No.Table B-2Parameter Value Range(Default)Description/FunctionMailboxNumber2-5 digits(None)Specifies the subscriber’s mailbox number. Mailboxnumber length is determined during setup or wheninitializing the system. Mailbox numbers cannot begin with"0". If the length of the mailbox number has been defined as3 digits, for example, the valid range for all mailbox numberswould be 100 through 997 (998 and 999 would be reservedfor the Message Manager and the System Manager). Thelength of the mailbox number cannot be changed throughthe Mailbox Setting screen once it has been specified.To access the menu for mailbox editing, follow the menu path as shown:System Administration Top Menu-1-1-1-Mailbox No.-1Table B-3Parameter Value Range(Default)Description/FunctionTheExtension ofthe Owner2-5 digits(None)Used to transfer calls through the VPS to a subscriber’smailbox.Any valid extension number including an Extension GroupList number can be assigned.NoteIf an Extension Group List number is assigned to amailbox, all group members are able to share theinformation stored there.
