4.7 DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAWInstallation Manual 1354.7.8 Two-Way Recording (TWR) Button AssignmentFor the Two-Way Recording feature to work at an extension, the extension must have a TWRbutton on it. This button must either be a DSS/BLF or CO button with a lamp. Follow theprocedure below to assign a TWR button on an extension. (This is station level programmingand should be done at each individual phone.) PC programming is also available (see 4.7.12Button Assignment via PC Programming).1. Enter Station (Personal) Programming:With the phone on-hook, Press the PROGRAM button.(Display changes to PT-PGM Mode.)2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the TWRbutton.3. Press [90].Screen output: 2WAY-REC-4. Enter a Voice Mail floating extension number.Screen output: 2WAY-REC- _ _ _(_ _ _ = The Voice Mail floating extension number you entered).5. Press STORE.6. Press the PROGRAM button or lift the handset to exit the Station (Personal)Programming mode.7. Repeat these steps for each telephone.4.7.9 Two-Way Transfer (TWT) Button AssignmentFor the Two-Way Transfer feature to work at an extension, the extension must have a TWTbutton on it. This button must either be a DSS/BLF or CO button with a lamp. Follow theprocedure below to assign a TWT button on an extension. (This is station level programmingand should be done at each individual phone.) PC programming is also available (see 4.7.12Button Assignment via PC Programming).1. Enter Station (Personal) Programming:With the phone on-hook, Press the PROGRAM button.(Display changes to PT-PGM Mode.)2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the TWTbutton.3. Press [91].Screen output: 2WAY-Xfr-4. Enter a Voice Mail floating extension number.Screen output: 2WAY-Xfr- _ _ _(_ _ _ = The Voice Mail floating extension number you entered).5. Press STORE.Conditions: This button must be a flexible (CO or DSS/BLF)button to be programmed as a TWR button. When allVoice Mail ports are busy and this key is pressed, theuser will hear reorder tone.
