Panasonic KX-TD308 Installation Manual

Also see for KX-T7230: Reference guide User manual User guide Installation manual User manual

Contents

Panasonic KX-TD308 Installation Manual Manual pdf 364 page image

4 90 Resource Programming 8 0 0SMDR Incoming / Outgoing Call Log PrintoutDescription Used to determine which calls will produce an SMDR printout.Selection l Outgoing calls: All (all calls) / Toll (toll calls only) /Off (no printing)l Incoming calls: On (all calls) / Off (no printing)Default, Outgoing calls - All; Incoming calls - OnProgramming 1.2.Enter 800.Display: 800 SMDR IN/OUTPress NEXT to program outgoing calls.Display: 0utgoing:All3.4.5.Keep pressing SELECT until the desired selection isdisplayed.Press STORE.Press NEXT to prbgrarn incoming calls.6.Display: 1ncoming:OnKeep pressing SELECT until the desired selection isdisplayed.7. Press STORE.8. Press END.Conditions l It is necessary to connect a printer to the Serial Interface (RS-232C)port provided on the system.l After connecting a printer, do not press the RETURN key, if providedon the printer, within 10 seconds. Otherwise, the usage of the SerialInterface port is changed to system programming and printing will notOCCW.l If “Toll” is selected, the system will print out all the calls starting fromthe numbers stored in programs [301]-[305] ‘TRS Denied Code Entryfor Levels 2 through 6”.Feature References Section 3, FeaturesStation Message Detail Recording (SMDR).System Programming 4-129