3 Features L. . Line Access, AutomaticDescription Allows the extension user to dial the automatic line access numberand access an idle line from the outside line assigned for theextension. The proprietary telephone user can use the Loop-CObutton in place of the access number.Conditions l This feature functions with Automatic Route Selection (ARS), if ARSis activated If so, the least expensive route is automatically selected.l Each extension is subject to System Programming items for outsidelines available to access.l The outside line hunting sequence is determined by SystemProgramming.l This feature requires a CO button (L-CO or S-CO) assignment on aproprietary telephone (PT). Dialing the line access code selects a CObutton on a PI according to the priority:S-CO > L-CO (on a hunted outside line)l If Idle Line Preference - Outgoing is set on tbe telephone, the user canaccess an idle line only by going off-hook.l The system waits for a programmed time before dialing after an outsideline is seized.Programming ReferencesSection 4, System Programming[ 1001 Flexible Numbering, Automatic line access / ARS[ 1031 Automatic Access Outside Line Assignment[21 l] Dial Start Time[4OO] Outside Line Connection Assignment[605]-[606] Outgoing Permitted Outside Line Assignment - Day /NightFeature References Section 3, FeaturesOutside Line Connection Assignment - OutgoingOperation References DPT Features, Standard Telephone Features-User Manual Outward Dialing - Line Access, AutomaticFeatures 3-93
