Panasonic KX-TD308 Installation Manual

Also see for KX-T7230: Reference guide User manual User guide Installation manual User manual

Contents

Panasonic KX-TD308 Installation Manual Manual pdf 260 page image

4 2l Manager Programming 0 0 6Operator /Manager Extension AssignmentDescription Assigns the jack number for a manager and/or operators. Themanager extension can perform System Programming and managerservices. The operators have the ability to perform operatorservices.SelectionDefaultProgrammingConditionsl OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)l Jack number: 1 through 8Operator 1 - Jack 1;Operator 2 and Manager - Not stored1.2.3.4.5.6.7.Enter 006.Display: 006 OP-1, 2, MGRPress NEXT to program operator 1.Display: OPE-1:JacklTo program another item, you can also keep pressing NEXT or PREVuntil the desired one is displayed.Enter a jack number.To assign no operator or manager, press CLEAR.To change the current entry, press CLEAR and enter the new jacknumber.Press STORE.To program another item, press NEXT or PREV.Repeat steps 3 through 5.Press END.l Up to two operators and a manager can be programmed.l If the assigned jack is in extra Device Port mode, the proprietarytelephone jack is treated as the manager / operator extension.l If there is no operator or manager, press CLEAR in step 3.Feature References Section 3, FeaturesManager Extension OperatorSystem Programming 4-25