Panasonic KX-TD308 Installation Manual

Also see for KX-T7230: Reference guide User manual User guide Installation manual User manual

Contents

Panasonic KX-TD308 Installation Manual Manual pdf 257 page image

004 4 2l Manager ProgrammingExtension Name SetDescription Assigns names to the extension numbers programmed in program[003] “Extension Number Set”.Selection l Jack number: 1 through 8 (-1 / -2)(-1 = first part, -2 = second part)l Name: 10 characters (max.)Default All jacks - Not storedProgramming 1. Enter 004.Display: 004 EXT NAME SETConditions2. Press NEXT.Display: Jack NO?+3. Enter a jack number.To enter jack number 1, you can also press NEXT.To select the second part (-2), press NEXT after entering a jack number.Display: #l-1:Not Stored4. Enter a name.5.6.For entering characters, see Section 4.1.3 “Entering Characters”.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new name.Press STORE.7.8.To program another jack, press NEXT or PREV, orSELECT and the desired jack number.Repeat steps 4 through 6.Press END.l There is a maximum of 16 names. Each name has a maximum of 10characters.l Program [003] “Extension Number Set” is used to assign extensionnumbers.. For au explanation of jack numbering, see “Rotation of jack number”on page 4-7.Feature References Section 3, FeaturesDisplay, Call InformationIntercom CallingSpecial Features of the KX-T7235 - Extension Dialing4-22 System Programming