607-608 4 8l Extension ProgrammingDoorphone Ringing Assignment - Day /NightDescription These programs assign the extensions which will ring when adoorphone call is received during the day and night modes.Programmed extensions are also allowed to open the door.SelectionDefaultProgrammingConditionsl Jack number: 1 through 8, * (-1 / -2),(* =all jacks, -1 = first part, -2 = second part)l Enable / DisableJack l-l- Enable; Other jacks - Disable - Day / Night1. Enter a program address (607 for day or 608 for night).Display example: 607 DOOR SET DAY2. Press NEXT.Display: Jack NO?+3. Enter a jack number.To enter jack number 1, you can also press NEXT.To select the second part (-2), press NEXT after entering a jacknumber.Display example: #1-1:Enable4. Keep pressing SELECT until the desired selection isdisplayed.5. Press STORE.6. To program another jack, press NEXT or PREV, orSELECT and the desired jack number.7. Repeat steps 4 through 6.8. Press END.l For an explanation of jack numbering, see “Rotation of jack number”on page 4-7.l To assign all jacks to one selection, press the * key in step 3. In thiscase, the display shows the contents programmed for Jack 1.l One doorphone can be installed for the system.Feature References Section 3, FeaturesDoor Opener Night ServiceDoorphone Call.4-126 System Programming
