106 4 3l System ProgrammingStation Hunting Type ,Description Used to enable or disable hunting and set the Station Hunting typefor each extension group. There are six Station Hunting typesavailable: Circular, Termination, Voice Mail (VM), AutomatedAttendant (AA), Ring Group and Uniform Call Distribution (UCD).If circular hunting is assigned for a group, all of the extensions inthe group are searched until an idle one is found. If terminationhunting is assigned, searching stops at the extension which has thelargest jack number in the group. If VM hunting is assigned, all ofthe VM ports of an extension group are searched until an idle one isfound which permits Voice Mail Service. If AA hunting isassigned, all of the AA ports of an extension group are searcheduntil an idle one is found which permits AA Service. If RingGroup is assigned, all of the extensions in the ring group ringsimultaneously. If UCD is assigned, group members are hunted ina circular way.SelectionDefault All extension groups - DisableProgramming 1. Enter 106.l Extension group number: 1 through 8, * ( * =all extensiongroups)l Disable (no hunting) / Terminate (termination) / Circular / VM(voice mail) / AA (automated attendant) / RING / UCDDisplay: 106 STATION HUNT2. Press NEXT.Display: EXT GRP NO?+3. Enter an extension group number.To enter extension group number 1, you can also press NEXT.Display example: Groupl:Disable4.5.6.Keep pressing SELECT until the desired selection isdisplayed.Press STORE.7.To program another extension group, press NEXT or PREV,or SELECT and the desired extension group number.Repeat steps 4 through 6.8. Press END.4-38 System Programming
