FeaturesConditions(5) Dial NumberOutgoing call: shows the other party’s telephonenumber (maximum 25 digits). Valid digits are 0through 9, * , #, P (if PAUSE button is pressed), or themark “=” (if a host PBX access code is entered).Received call: shows . If a Caller ID is assigned tothe other party, it shows cI>, number and name.(6) Ring : shows the ring duration of the incoming call inMinutes / Seconds.(7) Duration : shows the duration of the call in Hours /Minutes / Seconds.(8) Act Code (Account Code): shows the account codeappended to the call.(9) CD (Condition Code): shows call handling type with thefollowing codes:TR: TransferFW: Call Forwarding to Outside LineRC: Received an incoming callAN: Answered an incoming callNA: Unanswered an incoming calll Connect a printer to the Serial Interface (RS-232C) connector of themain unit. After connecting a printer, do not press the RETURN key, ifprovided on the printer, for 10 seconds.l When programmed for outgoing toll calls only, printing occurs only forcalls which start with the numbers stored in any Denied Code Tablefrom levels 2 to 6. If ARS is employed, not the user-dialed but themodified number is checked against these tables.l This system can store information up to 100 calls. If more calls areoriginated or received, previous records are deleted starting with theoldest one.l It is possible to select the SMDR format for an incoming call withCaller ID, the caller’s number only or caller’s number and name, byprogram [990], Field (41).l It is possible to select whether the SMDR prints out received incomingcalls (RC) and answered incoming calls (AN) information by program[990], Field (42).l This data is not deleted when you reset the system.l If the system clock is not set by System Programming or if the calendarIC is out of order, the date and time are not printed out.l If FLASH is manually sent out during a conversation, the call record isprinted and a new record is started.Features 3-139
