3 Features SStation HuntingDescription If a called extension is busy, Station Hunting redirects theincoming call to an idle member of the extension group. Idleextensions are automatically searched according to the programmedtype. Six hunting types are available as follows:Circular hunting: The extensions are searched until an idleone is found, regardless of the jack number.Termination hunting: The extensions are searched untilreaching the extension which has the highest jack number inthe group.VM hunting: All the VM ports are searched until an idle oneis found to permit VM Service.AA hunting: All the AA ports are searched until an idle oneis found to permit AA Service.Ring Group hunting: All the extensions in the ring groupring simultaneously.UCD hunting: All the extensions in UCD group are searchedin a circular way.One of the hunting types is selected for each extension group.To leave the hunting group temporarily, use the Log-Out function.To re-join, use the Log-In function.Conditions l If all the searched extensions are busy, a busy tone is sent to the caller.l If the called extension has set Do Not Disturb, Call Forwarding or Log-Out, Station Hunting skips the extension.l If UCD is set, the Hunting is performed as a setting of UCD.Programming ReferencesSection 4, System Programming[ 1061 Station Hunting lype[602] Extension Group AssignmentFeature References Section 3, FeaturesExtension GroupLog-In / Log-OutRing GroupUniform Call Distribution (UCD)Voice Mail IntegrationOperation References Not applicable.Features 3-137
