Honeywell LYNX Touch User Manual

Also see for LYNX Touch L7000 Series: Installation and setup guide Programming guide Quick start guide Programming guide Guide

Contents

Honeywell LYNX Touch User Manual Manual pdf 57 page image

– 57 –USER FUNCTIONSUSER FUNCTIONSUSER FUNCTIONSUSER FUNCTIONSVideo Camera Control FeatureThe LYNX Touch L7000 supports up to 20 video cameras and provides the capability to view live video from amaximum of four cameras. The installation of a WiFi Communications module and a WiFi internet connectionare required. Check with your installer to see if this features is available.Selecting a Camera5100-100-001-V2Ready To ArmVideoNotesTrafficSecurityNews5-Day Forecast268351 :FPMJanuary 12, 2010Feels Like 71Mostly SunnyFAutomation1. With the system in the disarmed or armed state, select theVideo icon. The system advances to Cameras screen5200-100-010-V0IPCamerasMACNameBackScanReady To Arm 2. If no cameras have been discovered or if a list of discoveredcameras is invalid, a Camera scan will start automatically.Note: The latter can occur if a WiFi connection is lost.2. A Manual scan can be performed by selecting the “Scan”button. When the scan is complete the available cameraswill be displayed.Note: Up to 20 cameras will be viewable during scanning/enrollment however, only four will appear on each page.5200-100-007-V1IPCamerasMACName10.10.150.159 00:C0:02:8F:60:4E10.10.150.67 00:0E:8F:79:CB:C2Name10.10.150.158 00:0E:8F:79:C7:EFNameName10.10.150.176 00:C0:02:7B:67:E4NameBackScanReady To Arm 4. Select the desired camera(s) (up to four) from the list by“tapping” once. If applicable select the “” button to viewadditional pages of available cameras. Select the “” buttonto return to the previous page of the list.7000-100-019-V1IPCamerasMACName10.10.150.159 00:C0:02:8F:60:4E10.10.150.67 00:0E:8F:79:CB:C2Living Room10.10.150.158 00:0E:8F:79:C7:EFPoolPatio10.10.150.176 00:C0:02:7B:67:E4DenBackScanReady To Arm 5. The selected camera(s) are highlighted. To edit the cameraname go to step 6 OR to save the camera go to step 9.6. To edit the camera name select the highlighted camera againand then select the edit button.Note: To de-select a camera “tap” the highlighted camera twotimes.7. Select the “Clear” button on displayed keypad, then enter thedeisred text.8. Select “Done”.9. Select the “Back” button.7000-100-018-V01 23 4Ready To ArmPOOL PATIODEN LIVING ROOM10. The system displays video from the selected camera.11. To select a different camera, select the camera button thentap the selected camera two times and repeat steps 4 to 9 asapplicable.12. Refer to the Video Camera Controls table for informationregarding the Video Function buttons. The available controlsare dependent upon the cameras that have been installedand selected.