GE Grid Solutions D25User's ManualGE Information 994-0081-3.00-21 19Installation Steps, Continued7 If the FLASH memory has been deleted or corrupted, then youneed to download the code and configuration files. See Chapter 4:Configuring the D25 Software.8 If you have to download code and configuration files, then go backto step 5 and verify that the D25 is now operating correctly.Note If you are replacing a component that is already installed on the D25 orupgrading a specific component, then see Chapter 7: Upgrading andReplacing D25 Modules.First Look at the D25Front Panel • WESMAINT II+ connector for connecting a maintenance terminal or PC• LEDs for information on status, operation and traffic on communication ports• CONTROLS switch for setting Local or Remote operational state of the digitaloutput module• Optional LCD Display to display selected data stored in the D25 database• Keypad for using the menus shown on the LCD Display. Only present if LCDoption is includedBack Panel The D25 back panel is modular with removable sections. The types andnumber of connectors are specified when the unit is ordered but can bechanged in the field.There are two back panel options for the D25KE control board:• Termination with six DB-25 connectors• Termination with two FACE40 connectorsWESMAINTCONNECTOR STATUSINDICATORDISPLAYCONTROLSSWITCHKEYPAD LCD or TouchScreen Graphical
