Checking Information about the NetworkChecking the IP Address or the MAC Address of the MachineChecking the IP Address or the MAC Address of the ComputerChecking If the Computer and the Machine, or Computer and the Access Point Can CommunicateChecking the Network Setting InformationChecking the IP Address or the MAC Address of the MachineTo check the IP address or the MAC address of the machine, print out the network setting informationusing the operation panel of the machine.Printing Out Network Setting InformationTo display the network setting information using IJ Network Tool, select Network Information on theView menu.Canon IJ Network Tool ScreenChecking the IP Address or the MAC Address of the ComputerTo check the IP address or MAC address assigned to the computer, follow the procedure below.1. Select Command Prompt as shown below.• In Windows 8, select Command Prompt from the Start screen. If Command Prompt is notdisplayed on the Start screen, select the Search charm, then search for "Command Prompt".• In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories >Command Prompt.2. Enter "ipconfig/all" and press the Enter key.The IP addresses and the MAC addresses of the network devices installed on your computer aredisplayed. When the network device is not connected to the network, the IP address is not displayed.Checking If the Computer and the Machine, or Computer and the AccessPoint Can CommunicateTo check that communication is available, perform the ping test.1. Select Command Prompt as shown below.• In Windows 8, select Command Prompt from the Start screen. If Command Prompt is notdisplayed on the Start screen, select the Search charm, then search for "Command Prompt".• In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories >Command Prompt.2. Type the ping command and the IP address of the target machine or the target accesspoint, and then press the Enter key.ping XXX.XXX.XXX.XXX737
