Printing Out Network Setting InformationYou can print out the network settings of the machine such as its IP address and SSID.Important• This print out contains valuable information about your computer. Handle it with care.1. Make sure that the machine is turned on.2. Load a sheet of A4 or Letter-sized plain paper.3. Press the Setup button.The Setup menu screen is displayed.4. Use the button to select Device settings, then press the OK button.5. Use the button to select LAN settings, then press the OK button.6. Use the button to select Print LAN details, then press the OK button.The machine starts printing the network setting information.The following information on the machine's network setting is printed out.Item Explanations of the item SettingWireless LAN Wireless LAN Enable/DisableConnection Status of the Wireless LAN Active/InactiveMAC Address MAC Address XX:XX:XX:XX:XX:XXSSID SSID SSID of the wireless LANCommunication Mode Communication Mode InfrastructureChannel Channel XX (1 to 13)Encryption Method of the Encryption none/WEP/TKIP/AESWEP Key Length WEP Key Length Inactive/128/64Authentication Method of the Authentication none/auto/open/shared/WPA-PSK/WPA2-PSKSignal Strength Signal Strength 0 to 100 [%]TCP/IP Version TCP/IP Version IPv4 & IPv6/IPv4IPv4 IP Address Selected IP Address (IPv4) XXX.XXX.XXX.XXXIPv4 Default Gateway Default Gateway (IPv4) XXX.XXX.XXX.XXXSubnet Mask Subnet Mask XXX.XXX.XXX.XXX177
