WEP Details ScreenNote• This screen is not available depending on the printer you are using.Specify the printer WEP settings.Note• When changing the password (WEP key) of the printer, the same change must be made to thepassword (WEP key) of the access point.1. WEP Key:Enter the same key as the one set to the access point.The number of characters and character type that can be entered differ depending on the combination ofthe key length and key format.Key Length64bit 128bitKey Format ASCII 5 characters 13 charactersHexadecimal (Hex) 10 digits 26 digits2. Key Length:Select either 64bit or 128bit.3. Key Format:Select either ASCII or Hex.4. Key ID:Select the Key ID (index) set to the access point.5. Authentication:Select the authentication method to authenticate the printer's access to the access point.Select Auto or Open System or Shared Key.205
