Changing the Settings in the Wired LAN SheetNote• This screen is not available depending on the printer you are using.• Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.1. Start up IJ Network Tool.2. Select the printer in Printers:.3. Select Configuration... from the Settings menu.4. Click the Wired LAN tab.The Wired LAN sheet is displayed.For details on the Wired LAN sheet, see Wired LAN Sheet.5. Change the settings or confirm.Set the IP address of the printer to be used over the LAN. Specify a value appropriate for your networkenvironment.6. Click OK.After changing configuration, a screen is displayed asking you for confirmation before the settings aresent to the printer. If you click Yes, the settings are sent to the printer and the Transmitted Settingsscreen is displayed.189
