Scanning with the Access Point ModeWhen the machine enters the access point mode, you can scan from an external device such as a computeror a smartphone without involving an access point.Important• Before you use the machine with the access point mode, be sure to specify the access point name ofthe machine and the security setting.Before Using the Machine with the Access Point Mode1. Make sure that the machine is turned on.2. Press the Setup button.The Setup menu screen is displayed.3. Use the button to select Access point mode, then press the OK button.The machine enters the access point mode.Note• If the machine receives a fax in the access point mode, the machine cancels the access pointmode automatically after a certain time, then the machine switches to the fax mode.If you want to continue to scan with the access point mode, set the machine to the access pointmode again.4. Connect an external device such as a computer or a smartphone to the machine viawireless LAN.Perform wireless LAN settings with your external device, then assign the access point name specified forthe machine as a destination.Note• For details on how to perform wireless LAN settings with an external device, refer to the device'sinstruction manual.• While the machine is in the access point mode, you can confirm the access point name and thedetails on the security setting by pressing the OK button.Use the button to select a setting item to display, then press the OK button again.• If SSID is selected:The access point name specified for the machine is displayed.When you specify the machine as a destination for wireless connection to an external device,assign the access point name specified for the machine.• If Security protocol is selected:The details on the security setting specified for the machine is displayed.When a WPA2-PSK (AES) passphrase is valid, entering the passphrase is required toconnect an external device to the machine via wireless LAN. Enter the passphrase specifiedfor the machine.609
