Scanning Multiple Documents from the ADF (Auto DocumentFeeder) in Advanced ModeUse the Advanced Mode tab to specify the image brightness, color tone, etc. and scan multiple documentsplaced on the ADF (Auto Document Feeder) at one time.When scanning from the ADF, documents are scanned without preview.1. Place the documents on the ADF of the machine, then start ScanGear (scanner driver).Placing Documents (ADF (Auto Document Feeder))Starting ScanGear (Scanner Driver)2. Click the Advanced Mode tab and select Document (ADF Simplex) for Select Source.Note• Settings are not retained when you switch modes.3. Set Input Settings according to the document or purpose.Input Settings4. Set Output Settings.Output Settings5. Make image corrections and color adjustments as required.Image SettingsColor Adjustment Buttons6. Click Scan.Scanning starts.505
