Aligning the Print Head Position Automatically from YourComputerPrint head alignment corrects the installation positions of the print head and improves deviated colors andlines.This machine supports two head alignment methods: automatic head alignment and manual headalignment. Normally, the machine is set for automatic head alignment. If the printing results of automaticprint head alignment are not satisfactory, perform manual head alignment.The procedure for performing automatic print head alignment is as follows:Print Head Alignment1. Open the printer driver setup window2. Click Print Head Alignment on the Maintenance tabThe Start Print Head Alignment dialog box opens.3. Load paper in the machineLoad one sheet of A4 size or Letter size plain paper into the front tray.Note• The number of sheets to be used differs when you select the manual head alignment.4. Print head alignment pattern printingMake sure that the machine is on and click Align Print Head.The adjustment pattern is printed.Important• Do not open the paper output cover while printing is in progress.5. Adjustment pattern scanningAfter the adjustment pattern is printed, a message is displayed.As instructed in the message, load the adjustment pattern onto the platen, and press the Start buttonon the machine.Print head alignment starts.Note• To print and check the current setting, open the Start Print Head Alignment dialog box, and clickPrint Alignment Value.131
