Scanner TabOn the Scanner tab, you can specify the following settings.Important• Available functions and settings vary depending on your scanner or printer.Auto Power SettingsYou can set to turn the machine on or off automatically.Click Settings... to display the Auto Power Settings dialog box.Note• If the machine is off or bi-directional communication is disabled, a message may appear becausethe computer cannot collect the machine status. In that case, click OK to exit ScanGear (scannerdriver).Auto Power OnSelect Enable to turn on the machine automatically when data is received.Auto Power OffSpecify the amount of time you want to set from the list. When this time lapses without any databeing received, the machine turns off automatically.Important• When using a network compatible model by connecting to a network, the power does not turnoff automatically even if Auto Power Off is set.558
