Scanning in Advanced ModeUse the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc.when scanning.Refer to "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)" to scan multipledocuments at one time.Refer to "Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode" to scanmultiple documents placed on the ADF (Auto Document Feeder).Important• The following types of documents may not be scanned correctly. In that case, click (Thumbnail)on the Toolbar to switch to whole image view and scan.• Photos that have a whitish background• Documents printed on white paper, hand-written text, business cards, etc.• Thin documents• Thick documents• The following types of documents may not be scanned correctly.• Documents smaller than 1.2 inches (3 cm) square• Photos that have been cut to various shapes1. Place the document on the Platen, then start ScanGear (scanner driver).Placing Items (When Scanning from a Computer)Starting ScanGear (Scanner Driver)2. Click the Advanced Mode tab.The tab switches to Advanced Mode.Note• Settings are not retained when you switch modes.503
