About the Receive Mode• DRPD is available only in the US and Canada.• Network switch may not be available depending on the country or region of purchase.• Refer to Receiving Faxes for information on receiving faxes or the procedure for each receivemode.About the Receive ModeYou can select the receive mode suitable for your fax use conditions: whether you use a dedicated line forfax, etc.ReceivemodeYour fax use condition Receiving operationTEL prioritymodeWhen mainly receiving voicecalls (with a telephone oranswering machineconnected to the machine):When a call incomes, the telephone will ring.Pick up the handset.If the call is a voice call, talk on the telephone.If the call is a fax, hang up the handset after the machine startsreceiving the fax.Note• The telephone may not ring when a call incomes even if it isconnected to the machine, depending on the type or settings ofthe telephone.DRPD orNetworkswitchWhen receiving voice calls(with a telephone oranswering machineconnected to the machine)and subscribing to a ringpattern detection serviceprovided by your telephonecompany:When a call incomes, the telephone will ring. The machine detects afax call by the fax ring pattern.If the call is a fax, the machine will receive the fax automatically.If the machine does not detect the fax ring pattern, the telephone willcontinue ringing.Note• The telephone may not ring when a call incomes even if it isconnected to the machine, depending on the type or settings ofthe telephone.Fax onlymodeWhen not receiving voicecalls:When a fax incomes, the machine will receive the fax automatically.Advanced Settings of Receive ModeYou can specify the advanced settings of each receive mode.Note• The * (asterisk) on the LCD indicates the current setting.• Advanced setting in TEL priority modeYou can specify the following setting items.618
