When the Printer Driver Is Not Associated with a Port• If Not Found is displayed for the status, check the followings:• The access point is turned on.• When using wired LAN, the LAN cable is connected properly.• If the printer on a network is not detected, make sure that the printer is turned on, then selectRefresh. It may take several minutes to detect printers. If the printer is not yet detected, connectthe machine and the computer with a USB cable, then select Refresh.• If the printer is being used from another computer, a screen is displayed informing you of thiscondition.Note• This item has the same function as Update in the Canon IJ Network Tool screen.Network InformationDisplays the Network Information screen to confirm the network settings of the printer and thecomputer.Network Information ScreenDisplay Warning AutomaticallyEnables or disables automatic display of the instruction screen.When this menu is selected, the instruction screen is displayed if one or more ports areunavailable for printing.3. Settings menuConfiguration...Displays the Configuration screen to configure settings of the selected printer.Configuration ScreenNote• This item has the same function as Configuration... in the Canon IJ Network Tool screen.Associate Port...Displays the Associate Port screen and you can associate a port with the printer.Associate Port ScreenThis menu is available when No Driver is displayed for the selected printer. Associating a portwith the printer enables you to use it.Maintenance...Displays the Maintenance screen to revert the network settings of the printer to factory defaultand to mount the card slot as the network drive.Maintenance Screen4. Help menuInstructionsDisplays this guide.AboutDisplays the version of IJ Network Tool.223
