95EditingExample: AV Insert from a VCR1. Connect the camcorder to the VCR.See Playing Back on a TV Screen ( 38).2. VCR: Load a recorded cassette. Locate the scene you wish to insert andpause playback shortly before the scene.3. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.Make sure the tape-protect switch is set to allow recording.4. Locate the scene you wish to replace and pause playback shortly beforethe scene.You can use the playback buttons on the camcorder or the special playback buttons onthe wireless controller.5. Press the AV INSERT button on the wirelesscontroller.“AV INSERT” and “2a” appear.6. VCR: Play back the tape.7. Press the PAUSE a button on the wireless controllerwhen the scene you wish to insert appears.8. Press the STOP 3 button on the wireless controllerto stop inserting.Press the PAUSE a button on the wireless controller to pauseinserting.9. VCR: Stop playback.Set the zero set memory at the end of the scene you wish to replace. Thecamcorder will automatically stop AV insert at that point.CARD CAMERACARD CAMERAPLAY (VCR)CAMERAEPAUSEAV INSERT AV DV REMOTE SETSLOW 2STOPRECPAUSE12bitAUDIO OUTAUDIO DUB.REWPAUSEAV INSERT AV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.REWPAUSEAV INSERT AV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.4_D74PAL_E(87-99) 03.1.28 2:27 PM Page 95
