5-73Printing Environment Settings5SETUP Menu SettingsIMPORTANTThe HDD All Erase function is effective only for the jobs received after you specifyON for this setting. The jobs received before you specify ON for this setting are notcompletely erased. In this case, cycle the power of the printer or perform a hardreset.NOTE• If ON is specified, the printer may take time to process the data in order to performthe process for completely erasing the data.• This item is displayed only when an optional hard disk is installed.■ QUICK FORMAT-Erases the contents of the hard disk.QUICK FORMAT performs a quick format of the hard disk. Perform this operationwhen a problem has occurred to the hard disk.If the problem is not solved by executing QUICK FORMAT, perform STD FORMAT.IMPORTANT• If the message appears when QUICK FORMAT isexecuted, the hard disk is not formatted.• When performing QUICK FORMAT, remove all the interface cables (the LAN cable,USB cable, and printer cable) connected to this printer.NOTEThis item is displayed only when an optional hard disk is installed, and HDD ALLERASE is set to OFF.■ STD FORMAT-Erases the contents of the hard disk.STD FORMAT performs a standard format of the hard disk. Perform this operationwhen the problem is not solved by executing QUICK FORMAT.IMPORTANT• If the message appears when STD FORMAT is executed,the hard disk is not formatted.• When performing STD FORMAT, remove all the interface cables (the LAN cableand USB cable) connected to this printer.• While STD FORMAT is being executed, is displayed in thedisplay. Wait for a moment until the format is completed.NOTEThis item is displayed only when an optional hard disk is installed.
