5-25Printing Environment Settings5SETUP Menu Settings■ POWER SAVE TIME00:00 to 23:59If POW. SAVE TIMER (See the previous item) is set to ON, the printer entersPower Save Mode 1 (the Panel Off mode) when the time specified in this item haselapsed.This item is convenient if you want to set the printer to Power Save Mode 1 (thePanel Off mode) on the same time everyday.■ CALIBRATE TIMEROFF*, ONSpecifies whether the calibration of the printer should be started when the timespecified in CALIBRATE TIME (See the next item) has elapsed.If ON is specified, calibration of the printer is started when the time specified inCALIBRATE TIME has elapsed.If OFF is specified, calibration of the printer is not started even when the timespecified in CALIBRATE TIME has elapsed.Calibration adjusts color hues for the printer.NOTECalibration is not performed if the printer is receiving print data at the time specifiedin CALIBRATE TIME.■ CALIBRATE TIME00:00 to 23:59If CALIBRATE TIMER (See the previous item) is set to ON, calibration of theprinter is started when the time specified in this item has elapsed.This item is convenient if you want to calibrate the printer on the same timeeveryday.HARD DISKON*, OFFSpecifies whether to use the following functions that require a hard disk.• Interrupt print• Changing the order of print data• Changing the attributions of print data (print copies, etc.)• Pausing/Resuming print data processing• Saving print data on the hard disk (boxes) (data can be printed again) (See p.5-111)
