5-23Printing Environment Settings5SETUP Menu SettingsNOTEIn some countries and regions, time is advanced throughout the summer season.The period in which this is applied is called "Daylight Saving Time".■ TIME ZONEGMT-12 to GMT+12Specifies the time zone according to the region where the printer is being used.IMPORTANTAfter changing the settings for this item, cycle the power of the printer or perform ahard reset to make the settings effective.NOTEThe standard time zones of the world are expressed globally in terms of thedifference in hours (± up to 12 hours) from GMT (± 0 hours). A time zone is a regionthroughout which this time difference is the same. An area which shares thesame-time zone difference is called a time zone.* The time at the Greenwich Observatory in England is called GMT (Greenwich Mean Time).TIMER SETTINGS■ WAKE UP TIMEROFF*, ONSpecifies whether the printer should use the Wake Up function that releasesPower Save Mode (the Panel Off mode, the Printer Power Save mode, and theDeep Sleep mode).If ON is specified, Power Save Mode (the Panel Off mode, the Printer Power Savemode, and the Deep Sleep mode) is released when the time specified in WAKEUP TIME (See the next item) has elapsed.If OFF is specified, the printer does not use the Wake Up function.NOTEThe Wake Up function is for releasing the printer from Power Save Mode (the PanelOff mode, the Printer Power Save mode, and the Deep Sleep mode). When theprinter is OFF, the Wake Up function does not function.
