5-46Printing Environment Settings5SETUP Menu SettingsNOTE• Normally, you do not need to adjust the print density with this item.• When this printer is connected to a network on which two or more printers arebeing used at the same time, make a fine adjustment on the gap of the print densityamong the printers.DENSITY: YELLOW1 to 16; 9*Adjusts the print density of yellow for the print data. As the value increases, theprint density becomes denser.NOTE• Normally, you do not need to adjust the print density with this item.• When this printer is connected to a network on which two or more printers arebeing used at the same time, make a fine adjustment on the gap of the print densityamong the printers.DENSITY: BLACK1 to 16; 9*Adjusts the print density of black for the print data. As the value increases, theprint density becomes denser.NOTE• Normally, you do not need to adjust the print density with this item.• When this printer is connected to a network on which two or more printers arebeing used at the same time, make a fine adjustment on the gap of the print densityamong the printers.COLOR MODEAUTO*, COLOR, BLACK & WHITESpecifies whether to print in color or in black and white.If AUTO is specified, the printer automatically switches between color printing andblack-and-white printing according to the document type.If COLOR is specified, the printer prints using the four colors of KYMC (Black,Yellow, Magenta, and Cyan).If BLACK & WHITE is specified, the printer prints in black and white even whenprinting a color document.
