|
3-59Loading Paper in the Multi-purpose TrayPaper Loading and Output Tray3Specifying the Size of the Paper in the Multi-purpose TrayWhen you loaded paper in the multi-purpose tray, specify the paper size for themulti-purpose tray using the control panel. When using paper or envelopes ofstandard size, specify its size. When loading non-standard size paper, specifyCUSTOM SIZE or CUSTOM SIZER. The paper size setting for the multi-purposetray is set to "LTR" by default.Specify the paper size setting for the multi-purpose tray using the followingprocedure.IMPORTANT• Match the paper size specified in the SETUP menu of the printer and that specified in theprinter driver. If they do not match, the message appears. In thiscase, the setting for TRAY PAPER SIZE is changed to that in the printer driver bypressing [Online], allowing you to continue printing.• When non-standard size paper is loaded, specify the setting for TRAY PAPER SIZE inthe control panel as follows.- When the paper is loaded in landscape orientation (Only when UFR II Printer Driver isused): CUSTOM SIZE- When the paper is loaded in portrait orientation: CUSTOM SIZER• When you change the paper loaded in the multi-purpose tray frequently, it is convenient ifTRAY PAPER SIZE in the control panel is set to MIXED SIZES. If TRAY PAPER SIZE isset to MIXED SIZES, you do not need to specify the setting for TRAY PAPER SIZE eachtime you load the different size paper. However, when specifying MIXED SIZES, makesure that the size of the paper loaded in the multi-purpose tray matches the paper sizespecified in the printer driver before printing. If they do not match, the printer may stopprinting, displaying the message <41 CHK PAPER SZE>, or a paper jam may occur. Besure to check if the paper size specified in the printer driver matches the size of the paperloaded in the multi-purpose tray before using the printer.• When printing custom size paper from UFR II Printer Driver, you can load the papereither in portrait or landscape orientation. However, if you want to print custom size paperof its long edges 11.69 in. (297.0 mm) or less when TRAY PAPER SIZE is set to MIXEDSIZES, load the paper in landscape orientation. When you are not printing from UFR IIPrinter Driver, load the paper in portrait orientation.NOTEThe names of the following paper sizes are indicated by an abbreviation.Ledger (11 x 17): LD, Legal: LG, Letter: LT, Executive: EX, Statement: ST, Envelope DL:DL, Envelope COM10: CO, Envelope C5: EC5, Envelope Monarch: MO, Envelope B5:EB5, Custom Size: 80 to 99, Custom SizeR/Long Size Paper: 80R to 99R, Free/MixedSizes: FR
|
