Canon Color imageRUNNER LBP5975 User Manual

Also see for Color imageRUNNER LBP5970: Brochure & specs Brochure & specs Brochure & specs Getting started guide Getting started guide

Contents

Canon Color imageRUNNER LBP5975 User Manual Manual pdf 276 page image

5-71Printing Environment Settings5SETUP Menu SettingsNOTEEven if ON is specified, the printer does not switch the paper size when the papersource for the paper size is empty.SP.IMAGE MODEOFF*, LEVEL1, LEVEL2Toner on the parts dense in color may not fix onto the paper and not printedproperly. In this case, specify LEVEL1 for this item. If the problem is not solved byspecifying LEVEL1, specify LEVEL2.IMPORTANT• If this solves the problem, reset the setting to the default value, OFF.• If LEVEL1 or LEVEL2 is specified, the print density may be lighter than when OFFis specified because the printer prints with the toner consumption adjusted.SP.S-SIZE MODE1-2 to 2; 0*When printing after the paper is changed from narrower one (Statement size etc.)to wider one (Letter size etc.), the printer may stop printing temporarily and cooldown the fixing unit so that the print quality is maintained. You can specify thewaiting time before the print operation begins for this case.The smaller the setting value is, the more the printer gives priority to the imagequality when printing. However, the waiting time before the print operation beginsmay be lengthened.The greater the setting value is, the shorter the printer makes the waiting timewhen printing. However, residual images of the previously printed text or imagesmay appear on both sides of the paper.