5-43Printing Environment Settings5SETUP Menu SettingsSpecify OFF for this item when you want to match the setting of the orientation orprinting side for the last page with those for its previous page, such as when youwant to print previously printed paper etc. whose printing orientation or printingside is fixed.NOTEThe setting is effective only when 2-SIDED PRINT. is set to ON.QUALITY MENU OptionsRESOLUTIONFINE*, SUPER FINESpecifies the resolution for when processing print data.Resolution is indicated in "dpi" that indicates the number of dots per inch, and thelarger the value is, the higher precision you can print at.If FINE is specified, the printer prints in the Fine mode at 600dpi. This mode isappropriate for printing general text or charts at a high speed.If SUPER FINE is specified, the printer prints in the Super Fine mode at 1200dpi.This mode reproduces text and outlines of diagrams clearly with a fine resolution.This mode is appropriate especially for printing data that contain many smallletters.IMPORTANTIf TEXT, GRAPHICS, or IMAGE in the following items is set to ERR DIFFUSION,and this item is set to SUPER FINE, ERR DIFFUSION changes to HIGH RESOL..- B & W HALFTONES and COLOR HALFTONES in HALFTONES in the QUALITYMENU options in the SETUP menu- B & W HALFTONES and COLOR HALFTONES in the PDF1.5 menu- B & W HALFTONES and COLOR HALFTONES in the PS menu● About memory amount required for using the Super Fine modePrinting in the Super Fine mode requires a large amount of memory for dataprocess. Therefore, depending on the amount or type of data, the message<39 SPL MEM.FULL> may appear, disabling printing. In this case, print withRESOLUTION set to FINE and GRADATION LEVEL to HIGH 1, or install anoptional expansion RAM module as needed. For details on the optionalexpansion RAM modules, see Getting Started Guide.
