5-22Printing Environment Settings5SETUP Menu SettingsDATE AND TIME■DATE SETTING01/01/2001 to 31/12/2089This printer has a clock function. This clock is used for the printer maintenanceand job history management. Specify date in this item when the clock is notkeeping correct date.NOTE•Date is set before shipment.•Enter date using the following keys on the control panel.- Increases/decreases number ...... [] []- Moves digits ................................. [] []- Determines the entered date ....... [OK]•If you do not change the date, press [Online].■TIME SETTING00:00:00 to 23:59:59This printer has a clock function. This clock is used for the printer maintenanceand job history management. Specify time in this item when the clock is notkeeping correct time.NOTE•Time is set before shipment.•The clock in the printer should be accurate within ± 60 seconds per month. Adjustthe clock periodically in this item.•Enter time using the following keys on the control panel.- Increases/decreases number ...... [] []- Moves digits ................................. [] []- Determines the entered time ........ [OK]•If you do not change the time, press [Online].■DAYLIGHT SAVINGDST SETTINGS ................... ON*, OFFSTART DATE ........................ , , , END DATE............................ , , , Specifies whether to set the daylight saving time in DST SETTINGS and its timeduration in START DATE and END DATE.IMPORTANTAfter changing the settings for this item, cycle the power of the printer or perform ahard reset to make the settings effective.
