90Instruments and controlsFunctionsManual settings are not affected by the system’s automation.Pressing AUTO will cancel all manual settings.The selected temperature is always maintained automatically.Temperature, air distribution, fan speed and recircula-tion will be controlled automatically.Pressing AUTO once will cancel all previous manualselections.The ACC system is in AUTO mode when the engine isstarted.A/C compressor OFF.No cooling of inlet air. Temperature, air distribution andfan speed still under automatic control.Turn the fan control anticlockwise until "OFF" lights up.ACC system OFF.Fan OFF.A/C compressor OFF.Air distribution selections locked in current settings.Recirculation can be selected manually.Front seat heating 3.Pressing the AUTO button will put the system into auto-matic mode.Reactivation by turning the fan control clockwise oneclick causes the system to resume any manual selec-tions.The rear window and door mirror heating is controlledmanually.Deactivate the heating as soon as the rear window isfree of ice and misting so as not to unnecessarily loadthe battery. Heating will deactivate automatically aftera set time period.Turn the fan control to increase fan speed.If fan speed 0 is selected, the A/C compressor will bedisengaged and the indicator on the AC OFF button willilluminate.Recirculation is controlled manually to optimize coolingalthough it can also be switched on and off manually.Recirculation does not appreciably change the airquality, but it can be beneficial to activate it manually toprevent unpleasant smells from entering the cabin.460_OM_MY09.book Page 90 Wednesday, April 2, 2008 10:32 AM