3Com 3CRWX120695A Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Command reference Configuration guide Installation and Basic Configuration Guide

Contents

3Com 3CRWX120695A Command Reference Manual Manual pdf 484 page image

484 CHAPTER 19: T RACE COMMANDSsave trace Saves the accumulated trace data for enabled traces to a file in the WXswitch’s nonvolatile storage.Syntax — save trace filename■ filename — Name for the trace file. To save the file in a subdirectory,specify the subdirectory name, then a slash. For example: traces/trace1Defaults — None.Access — Enabled.History — Introduced in MSS Version 3.0.Examples — To save trace data into the file trace1 in the subdirectorytraces, type the following command:WX4400# save trace traces/trace1set traceauthenticationTraces authentication information.Syntax — set trace authentication [mac-addr mac-address][port port-num] [user username] [level level]■ mac-addr mac-address — Traces a MAC address. Specify a MACaddress, using colons to separate the octets (for example,00:11:22:aa:bb:cc).■ port port-num — Traces on a WX port number.■ user username — Traces a user. Specify a username of up to32 alphanumeric characters with no spaces.■ level level — Determines the quantity of information included inthe output. You can set the level with an integer from 1 to 10, wherelevel 10 provides the most information. Levels 1 through 5 provideuser-readable information. If you do not specify a level, level 5 is thedefault.Defaults — The default trace level is 5.Access — Enabled.History — Introduced in MSS Version 3.0.