3Com 3CRWX120695A Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Command reference Configuration guide Installation and Basic Configuration Guide

Contents

3Com 3CRWX120695A Command Reference Manual Manual pdf 300 page image

300 CHAPTER 9: MANAGED ACCESS POINT COMMANDS■ enable — Enables CCMP encryption for WPA clients.■ disable — Disables CCMP encryption for WPA clients.Defaults — CCMP encryption is disabled by default.Access — Enabled.History — Introduced in MSS Version 3.0.Usage — To use CCMP, you must also enable the WPA IE.Examples — The following command configures service profile sp2 touse CCMP encryption:WX4400# set service-profile sp2 cipher-ccmp enablesuccess: change accepted.See Also■ “set service-profile cipher-tkip” on page 300■ “set service-profile cipher-wep104” on page 301■ “set service-profile cipher-wep40” on page 302■ “set service-profile wpa-ie” on page 312set service-profilecipher-tkipDisables or reenables Temporal Key Integrity Protocol (TKIP) encryption ina service profile.Syntax — set service-profilename cipher-tkip {enable | disable}■ name — Service profile name.■ enable — Enables TKIP encryption for WPA clients.■ disable — Disables TKIP encryption for WPA clients.Defaults — When the WPA IE is enabled, TKIP encryption is enabled bydefault.Access — Enabled.History — Introduced in MSS Version 3.0.Usage — To use TKIP, you must also enable the WPA IE.