3Com 3CRWX120695A Command Reference Manual

Also see for 3CRWX120695A: User guide User guide Command reference Configuration guide Installation and Basic Configuration Guide

Contents

3Com 3CRWX120695A Command Reference Manual Manual pdf 357 page image

set igmp mrsol 357■ enable — Adds the port to the list of static multicast router ports.■ disable — Removes the port from the list of static multicast routerports.Defaults — By default, no ports are static multicast router ports.Access — Enabled.History — Introduced in MSS Version 3.0.Usage — You cannot add MAP access ports or wired authenticationports as static multicast ports. However, MSS can dynamically add theseport types to the list of multicast ports based on multicast traffic.Examples — The following command adds port 6 as a static multicastrouter port:WX1200# set igmp mrouter port 6 enablesuccess: change accepted.The following command removes port 6 from the static multicast routerport list:WX1200# set igmp mrouter port 6 disablesuccess: change accepted.See Also■ “display igmp statistics” on page 352set igmp mrsol Enables or disables multicast router solicitation by a WX.Syntax — set igmp mrsol {enable | disable} [vlan vlan-id]■ enable — Enables multicast router solicitation.■ disable — Disables multicast router solicitation.■ vlan vlan-id — VLAN name or number. If you do not specify aVLAN, multicast router solicitation is disabled or enabled on all VLANs.Defaults — Multicast router solicitation is disabled on all VLANs bydefault.Access — Enabled.