OneStart

Menu

Barco XDL-4K75 manuals

XDL-4K75 first page preview

XDL-4K75

Brand: Barco | Category: Projector
Table of contents
  1. software license agreement
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Safety
  6. General considerations
  7. Safety training to be provided by the installer
  8. Important safety instructions
  9. Product safety labels
  10. High Brightness precautions: Hazard Distance (HD)
  11. HD for fully enclosed projection systems
  12. HD in function of modifying optics
  13. System overview
  14. XDL series projector
  15. Chillers and hoses
  16. Safety system
  17. Free download of Projector Toolset
  18. Installation preparations
  19. Installation requirements
  20. Unpacking the projector
  21. Initial inspection
  22. Projector configurations
  23. Additional vertical shift of the Lens Holder
  24. Removing the projector feet
  25. Pulse Remote Control Unit
  26. Remote control, battery installation
  27. Remote control, protocol setup
  28. Functionality overview
  29. Functions of the "button pressed indicator
  30. Using the XLR connector of the RCU
  31. Silicone protection sleeve for the RCU (optional)
  32. Physical Installation
  33. Removing the transport protection bars
  34. Connecting the hoses with projector and chillers
  35. Connecting the data cable with projector and chillers
  36. Accessing the mains compartment
  37. Connecting the external safety interlocks
  38. Three phase power input configuration of the projector
  39. Connecting the projector with the mains electricity
  40. Power loop through to the projector electronics
  41. Connecting a UPS to the projector electronics
  42. Lenses & Lens selection
  43. Available lenses
  44. Lens safety cable
  45. Lens installation
  46. Lens removal
  47. Scheimpflug
  48. Scheimpflug introduction
  49. Scheimpflug adjustment
  50. Fixation of the Lens Holder front plate
  51. Input & Communication
  52. Introduction
  53. Communication connections
  54. Input source connections – Quad combo input Mark II
  55. Input source connections – Quad DP 1.2 Input board
  56. LED and Button indication chart
  57. Laser Status
  58. WiFi & GSM Module
  59. Compliance FCC
  60. Installation of the WiFi module
  61. Installation of the GSM module
  62. Getting Started
  63. Switching on the XDL
  64. Switching to standby
  65. Projector ON/OFF cycle explained
  66. Using the RCU
  67. Projector Address
  68. Quick setup via Direct access
  69. Software update
  70. Maintenance procedures
  71. Check the dust filters
  72. Vacuum cleaning of the dust filters
  73. Washing and drying the dust filters
  74. Cleaning the lens
  75. Cleaning the exterior of the projector
  76. Removal and installation of the projector covers
  77. Opening the front and rear cover doors
  78. Removal of the side covers
  79. specifications
  80. A.1 Specifications of the XDL-4K30
  81. A.2 Specifications of the XDL–4k60
  82. A.3 Specifications of the XDL–4k75
  83. A.4 Dimensions of the XDL series projector
  84. A.5 Technical Regulations
  85. environmental information
  86. B.1 Turkey RoHS compliance
  87. C.1 Overview video timings
  88. C.2 Overview video timings SDI Inputs
  89. C.3 Overview video timings HDMI 2.0 inputs
  90. C.4 Overview video timings DisplayPort 1.2 inputs
  91. C.5 Overview video timings HDBaseT inputs
  92. Glossary
  93. Index
XDL-4K75 first page preview

XDL-4K75

Brand: Barco | Category: Projector
Table of contents
  1. general considerations
  2. general safety instructions
  3. product safety labels
  4. Table Of Contents
  5. Image
  9. R5906151 XDL 17/04/2018
  10. communication connections
  12. led status
  13. lcd panel
  14. starting image projection
  15. switching to standby
  16. using the rcu
  17. software update
  18. menu memory
  19. how to select
  20. adjusting the sharpness
  21. about warping
  22. functional description
  23. black level adjustment
  24. introduction to a network connection
  25. wired ip address set up
  26. how to activate
  27. service menu
  28. what can be seen
  29. lens calibration
  30. default settings
  31. cleaning the lens
  32. cleaning the exterior of the projector
  33. disposal information
XDL-4K75 first page preview

XDL-4K75

Brand: Barco | Category: Projector
Table of contents
  1. user manual
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Safety
  6. General considerations
  7. Important safety instructions
  8. Product safety labels
  9. High Brightness precautions: Hazard Distance (HD)
  10. HD for fully enclosed projection systems
  11. HD in function of modifying optics
  12. Pulse Remote Control Unit
  13. Remote control, battery installation
  14. Remote control, protocol setup
  15. Functionality overview
  16. Functions of the "button pressed indicator
  17. Using the XLR connector of the RCU
  18. Silicone protection sleeve for the RCU (optional)
  19. Input & Communication
  20. Introduction
  21. Communication connections
  22. Input source connections – Quad combo input Mark II
  23. Input source connections – Quad DP 1.2 Input board
  24. LED and Button indication chart
  25. Laser Status
  26. Getting Started
  27. Switching on the XDL
  28. Switching to standby
  29. Projector ON/OFF cycle explained
  30. Using the RCU
  31. Projector Address
  32. Quick setup via Direct access
  33. Software update
  34. Graphic User Interface (GUI)
  35. Overview
  36. Test Patterns
  37. GUI – Source
  38. Displaying a single source
  39. Connector Settings
  40. GUI – Image
  41. Setting image levels manually
  42. Adjusting the sharpness
  43. Adjusting the gamma correction
  44. P7 Realcolor
  45. Brilliantcolor
  46. Displaying HDR content – Perceptual Quantizer (PQ)
  47. GUI – Installation
  48. Configuring the lens, zoom-focus
  49. Orientation
  50. Warping
  51. Warping – Screen Size
  52. Warping – 4 corners adjustment
  53. Warping – Bow
  54. Warping – Warp files
  55. Warping – Latency control in a multi projector setup
  56. Blending & masking
  57. Blend Files
  58. Basic black level adjustment
  59. Black Level Files
  60. RGB adjustment
  61. Laser illumination
  62. Scaling modes
  63. D projection
  64. Setup process 3D projection
  65. Choosing the desired Display Setup
  66. D emitter Setup
  67. GUI – System Settings
  68. Communication, LAN setup
  69. IR control
  71. Setting a custom projector name
  72. GSM configuration
  73. Themes
  74. Lens features
  75. Controlling the backlight of the LCD Display
  76. Lens Calibration
  77. Electronic Convergence
  78. Advanced Settings
  79. Advanced Settings – Color
  80. Advanced Settings – Dual Eye Real Color correction
  81. Advanced Settings – Statistics
  82. Status menu
  83. Status menu overview
  84. Maintenance procedures
  85. Check the dust filters
  86. Vacuum cleaning of the dust filters
  87. Washing and drying the dust filters
  88. Cleaning the lens
  89. Cleaning the exterior of the projector
  90. specifications
  91. A.1 Specifications of the XDL-4k30
  92. A.2 Specifications of the XDL–4k60
  93. A.3 Specifications of the XDL–4k75
  94. A.4 Dimensions of the XDL series projector
  95. A.5 Technical Regulations
  96. environmental information
  97. B.1 Turkey RoHS compliance
  98. C.1 Overview video timings
  99. C.2 Overview video timings SDI Inputs
  100. C.3 Overview video timings HDMI 2.0 inputs
  101. C.4 Overview video timings DisplayPort 1.2 inputs
  102. C.5 Overview video timings HDBaseT inputs
  103. dmx chart
  104. D.1 DMX chart input board positioning
  105. D.3 DMX chart, Extended
  106. Glossary
  107. Index
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved