R5906151 /02 XDL80Image 8-184. To set warping on one of the four corners, select one of the four corners and confirm.5. Set the desired X and Y coordinates for this corner, using the arrow keys, and confirm.Image 8-19Tip: A red border corner will be projected along with the current image. The border is a visual aid,showing the result of the warped corners.6. Repeat from for each corner, until all corners are warped in the desired position.To reset the 4 corner adjustments, select Reset and press the OK button.8.4.5 Warping – BowAbout bow adjustmentA bow distortion can be adjusted so that a normal image is displayed. Positive adjustments introduce moreoutside bow distortion. Negative adjustments introduce more inside bow distortion.GUI – Installation
