R5906151 /02 XDL110DMX Feature What can be done?DMX Monitor If a DMX device is connected, the settings per channel can be displayed via the Monitorbutton.Art-Net DMX DMX can be sent via the Ethernet connector to the projector instead of the classic DMXconnector. This function can be enabled or disabled. Art-Net is generally used when morethan 512 addresses are used in your setup.DMXUniverseNote: DMX Universe can only be used when Art-Net DMX is enabled.If Art-Net is enabled, you can specify which DMX universe this projector belongs to.DMX PowerDownThe projector can be forced to shut down after a certain time-out period (in minutes) if noDMX signals are available.How to set up DMX?1. In the main menu, select System Settings → Communication → DMX.Image 9-14: Communication menu, DMXThe DMX menu is displayed.Image 9-15: DMX menu2. Choose the desired DMX mode.3. Choose the desired starting channel.4. Choose whether or not you want the Auto power-down feature to be enabled. If enabled, determine the time-out.5. If required, enable Art-Net. If enabled, determine the desired Art-Net Universe and Art-Net channel.9.5 GSM configurationOnly possible when a GSM module with SIM card is installed in the projector.GUI – System Settings
